Are you looking to produce Orthodontic Clear Aligners in house in the dental surgery?

Are you tired of your Dental Clear Aligners costing a fortune?

The DDA Aligner Service by DDA Lab will allow you to send your digital impressions and receive back a set of aligner models ready to print and produce your own aligners quickly, simply and accurately.

We use well experienced and highly regarded Lab technicians using specialist orthodontic movement software to calculate and move the teeth in a safe and predictable manner.

Upload your opposing stl models during check out.

Within 7 days you will receive back;

- A DDA Aligner Report

- Collision IPR Data

- A video mockup showing the proposed movements  

- A set of ready to print DDA Aligner STL Models

N.B. It is the responsibility of the clinician to approve;

- The proposed movements.

- The proposed IPR.

- The production of the aligners using the STL Models either in house or via a production lab.

To use this service, you are agreeing that you;

- Have completed a DDA Aligner Training Course (or approved partner training) and have received a certificate for completion of training.

- Take full responsibility as a qualified Dental Clinician in the prescription, production and use of orthodontic clear aligners.

Free Refinement Conditions;

N.B. This is for refinement of an existing case ONLY and on the following conditions;

- Refinement should be undertaken ONLY if the case isnt tracking if mid treatment.

- If the case is mid treatment and requires refinement, please ensure the IPR report has been followed.

- If mid treatment and the uploaded scan matches the number previously designed for the next step and no refinement is found to be necessary to keep on track then no refiners will be advised and you should continue to use the next STLs initially produced.,

- If end of treatment, the max refinement allowed is 2 refinement sessions with new STLs designed. After 2 refinement sessions, you must purchase a new design service.

- If end of treatment, refinement must commence within 3 months of expected end of treatment. After 3 months, you must purchase a new design service.

UPLOAD INSTRUCTIONS;

Upload your opposing stl models during check out.

Within 7 days you will receive back;

- A set of ready to print DDA Aligner Refinement STL Models

N.B. It is the responsibility of the clinician to approve;

- The proposed movements.

- The proposed IPR.

- The production of the aligners using the STL Models either in house or via a production lab.

To use this service, you are agreeing that you;

- Have completed a DDA Aligner Training Course (or approved partner training) and have received a certificate for completion of training.

- Take full responsibility as a qualified Dental Clinician in the prescription, production and use of orthodontic clear aligners.

If you would rather have the DDA Lab print your STL and create a boxed aligner you can purchase these here.

You should use this service AFTER you have received back your files from the DDA Aligner service.

Pricing is dependent on severity and number of aligners required.

Production is powered by Active Aligners

What are Active Aligners?

Active Aligners is a company run for Dentists, by Dentists. Working with us, you can confidently tackle cases including misalignment from second premolar to second premolar, crowding and spacing. Active Aligners provide a modern alternative to traditional braces. With laboratory fees lower than many competitors, Active Aligners deliver a cost-effective solution without compromising quality.

Strong and durable, all our aligners come with a 2mm straight trim-line backed by clinical research (Cowley, Mah and O”Toole, 2012). This gives the quality you demand and the versatility you need.

It’s simple to become a provider; there is no financial commitment or minimum case-load. 

Use your own intraoral scanner to send cases to our online platform. 

Why use Active Aligners

Here are some reasons to become a customer:

• Great support. Our customer service personnel are UK based and you can benefit from the experience of our treatment coordinator
• Quality training. You are not locked-in to a patient starter course. Customers get free online access to our accreditation course
• Business growth. Introducing Active Aligners can attract more patients to the practice, increase staff utilisation/motivation and grow your margin
• Flexible packaging. Our split packaging and accessories kit help facilitate payment in instalments and management of practice visits
• Fast delivery. We pride ourselves on efficiencies through the entire supply chain with delivery 14 working days from acceptance of the treatment plan.

To find out more about Active Aligners, please click here

Guided surgery is an implant placement technique that includes the following steps: diagnosis, virtual planning and 3D positioning before placement using a 3D Printed or Milled drill guide.

The main advantage of computer assisted prosthetically designed planning is working with 3D views of the patient's CBCT and intraoral anatomy. By utilising virtual mockups of the final position of the eventual prosthesis 3D planning can be prosthetically guided to enable a more predictable final position of the dental implant and also the prosthesis.

With the IDDA Universal Guided Surgery Kit it is possible to carry out guided computer-assisted surgery with ANY implant manufacturer having diverse morphologies, both with a cylindrical and tapered morphology with a sleeveless approach that is tailored to the specific system required.

For more information regarding 3Dii Dentiq Guide Software, please visit;

http://www.digitaldentalacademy.ac.uk

This purchase provides the user with an Extra licence dongle to run Dentiq Guide software on an extra PC.

Each dongle comes supplied with 10x STL Exports.

Intended Use;

The use of this software is exclusively for those who have attended a guided surgery training course, specifically on an authorised 3Dii Dentiq Guide training pathway. This software is intended to aid in the computerised 3D planning of implant placement using a preoperative CT scan and 3D STL impression data. 

Warning!

This software is part of an overall concept and may only be used in conjunction with the associated guided surgery training course supplied in association with the Digital Dental Academy. Settings and personalisation of the software is completed by the clinical team by their own liability.

Disclaimer:

3D Implant Planning, Custom 3D CAD Design, Nerve segmentation and tracing, Guide Production, data networking and any other services through Dentiq Guide Software are delivered "as is" without warranty, express or implied, statutory or otherwise, as to any matter whatsoever, including without limitation, merchantability and fitness for a particular purpose. Digital Dental Academy Ltd, Makes no warranty as to the sufficiency or suitability of said services and does not warrant the accuracy, completeness or correctness of the services. The results must be verified by a medical doctor or surgeon competent in completing surgery without such aids to ensure accuracy before being used and compared to the medical images provided. In no event will Digital Dental Academy Ltd, be liable to anyone for action taken in connection with the use of said services. The user accepts responsibility for making arrangements for all radiographs and CBCT scans to be interpreted and reported on. The user also accepts the responsibility to ensure that they are competent and adequately trained to use this software, and that their training remain current and appropriate to deal with the safe placement of implants along with all medical and surgical implications of surgery with or without the use of a computer assisted drill guide therefore maximising patient safety at all times.

By completing the purchase of this product you are agreeing to all of the above terms.

For more information regarding 3Dii Dentiq Guide Software, please visit;

http://www.digitaldentalacademy.co.uk

This purchase provides the user with 10x STL Exports to use on their Dentiq Dongle

Intended Use;

The use of this software is exclusively for those who have attended a guided surgery training course, specifically on an authorised 3Dii Dentiq Guide training pathway. This software is intended to aid in the computerised 3D planning of implant placement using a preoperative CT scan and 3D STL impression data. 

You can complete your authorised training by booking a course here;

www.digitaldentalacademy.co.uk

Warning!

This software is part of an overall concept and may only be used in conjunction with the associated guided surgery training course supplied in association with the Digital Dental Academy. Settings and personalisation of the software is completed by the clinical team by their own liability.

Disclaimer:

3D Implant Planning, Custom 3D CAD Design, Nerve segmentation and tracing, Guide Production, data networking and any other services through Dentiq Guide Software are delivered "as is" without warranty, express or implied, statutory or otherwise, as to any matter whatsoever, including without limitation, merchantability and fitness for a particular purpose. Digital Dental Academy Ltd, Makes no warranty as to the sufficiency or suitability of said services and does not warrant the accuracy, completeness or correctness of the services. The results must be verified by a medical doctor or surgeon competent in completing surgery without such aids to ensure accuracy before being used and compared to the medical images provided. In no event will Digital Dental Academy Ltd, be liable to anyone for action taken in connection with the use of said services. The user accepts responsibility for making arrangements for all radiographs and CBCT scans to be interpreted and reported on. The user also accepts the responsibility to ensure that they are competent and adequately trained to use this software, and that their training remain current and appropriate to deal with the safe placement of implants along with all medical and surgical implications of surgery with or without the use of a computer assisted drill guide therefore maximising patient safety at all times.

By completing the purchase of this product you are agreeing to all of the above terms.

For more information regarding 3Dii Dentiq Guide Software, please visit;

http://www.digitaldentalacademy.co.uk

This purchase provides the user with 30x STL Exports to use on their Dentiq Dongle (SAVE 20%)

Intended Use;

The use of this software is exclusively for those who have attended a guided surgery training course, specifically on an authorised 3Dii Dentiq Guide training pathway. This software is intended to aid in the computerised 3D planning of implant placement using a preoperative CT scan and 3D STL impression data. 

You can complete your authorised training by booking a course here;

www.digitaldentalacademy.co.uk

Warning!

This software is part of an overall concept and may only be used in conjunction with the associated guided surgery training course supplied in association with the Digital Dental Academy. Settings and personalisation of the software is completed by the clinical team by their own liability.

Disclaimer:

3D Implant Planning, Custom 3D CAD Design, Nerve segmentation and tracing, Guide Production, data networking and any other services through Dentiq Guide Software are delivered "as is" without warranty, express or implied, statutory or otherwise, as to any matter whatsoever, including without limitation, merchantability and fitness for a particular purpose. Digital Dental Academy Ltd, Makes no warranty as to the sufficiency or suitability of said services and does not warrant the accuracy, completeness or correctness of the services. The results must be verified by a medical doctor or surgeon competent in completing surgery without such aids to ensure accuracy before being used and compared to the medical images provided. In no event will Digital Dental Academy Ltd, be liable to anyone for action taken in connection with the use of said services. The user accepts responsibility for making arrangements for all radiographs and CBCT scans to be interpreted and reported on. The user also accepts the responsibility to ensure that they are competent and adequately trained to use this software, and that their training remain current and appropriate to deal with the safe placement of implants along with all medical and surgical implications of surgery with or without the use of a computer assisted drill guide therefore maximising patient safety at all times.

By completing the purchase of this product you are agreeing to all of the above terms.

For more information regarding 3Dii Dentiq Guide Software, please visit;

http://www.digitaldentalacademy.co.uk

This purchase provides the user with 50x STL Exports to use on their Dentiq Dongle (SAVE 33% - £20 PER EXPORT!)

Intended Use;

The use of this software is exclusively for those who have attended a guided surgery training course, specifically on an authorised 3Dii Dentiq Guide training pathway. This software is intended to aid in the computerised 3D planning of implant placement using a preoperative CT scan and 3D STL impression data. 

You can complete your authorised training by booking a course here;

www.digitaldentalacademy.co.uk

Warning!

This software is part of an overall concept and may only be used in conjunction with the associated guided surgery training course supplied in association with the Digital Dental Academy. Settings and personalisation of the software is completed by the clinical team by their own liability.

Disclaimer:

3D Implant Planning, Custom 3D CAD Design, Nerve segmentation and tracing, Guide Production, data networking and any other services through Dentiq Guide Software are delivered "as is" without warranty, express or implied, statutory or otherwise, as to any matter whatsoever, including without limitation, merchantability and fitness for a particular purpose. Digital Dental Academy Ltd, Makes no warranty as to the sufficiency or suitability of said services and does not warrant the accuracy, completeness or correctness of the services. The results must be verified by a medical doctor or surgeon competent in completing surgery without such aids to ensure accuracy before being used and compared to the medical images provided. In no event will Digital Dental Academy Ltd, be liable to anyone for action taken in connection with the use of said services. The user accepts responsibility for making arrangements for all radiographs and CBCT scans to be interpreted and reported on. The user also accepts the responsibility to ensure that they are competent and adequately trained to use this software, and that their training remain current and appropriate to deal with the safe placement of implants along with all medical and surgical implications of surgery with or without the use of a computer assisted drill guide therefore maximising patient safety at all times.

By completing the purchase of this product you are agreeing to all of the above terms.

Inspire Features:

• Camera provides more than 1 way to detect intraoral diseases 
  3 in 1 feature: Dental camera, Transillumination, and Flourescent technology all in one device.
• Seamless treatment
  User can use all the device functions of an intraoral camera, transillumination,
  and flourescent seamlessly by simple key press without stopping treatment.
• Able to select appropriate disease detection mode
  User can take a single image or multiple images at once depended
  upon the mode they choose.
• Macro to infinity
  Camera is able to focus from macro mode (close) to infinity that includes a full arch and face shot.
• Auto-focus
  Camera is able to focus in any position not only inside of oral cavity but also full arch and face shot.
• FHD image support
  The device shows FHD (1080p) in live image supported by a 5M sensor.
• Black & White function
  Capture and save small X-ray film image to PC

Features of the IDDA Printer;

• 【Smart and Fast Slicing Software】 comes with the latest version of CHITUBOX Slicing Software which gives you extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
• 【Resin saving and Better Printing】CHITUBOX allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using resin, you can get a better pritning result.
• 【Smart and Convenient】3.5'' inch color touch screen equipped with the latest ChiTu 5.0 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
• 【High Precision and Resolution uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm